Concrete is porous despite its solid look. Even though it can be a very strong substrate, bare concrete can be very porous which makes it particularly susceptible to cracking, chipping or flaking during freeze-thaw cycles and ground shift. The paste and aggregate can also be worn down by physical impact and abrasion. Water can penetrate concrete and if the concrete has reinforcing steel bar (rebar), the rebar can corrode if moisture, oxygen and chloride ions penetrate the concrete. Corrosion of rebar contributes to the deterioration of concrete. Occasionally, damage starts with a poor new project set up. Our products seal to repair damage and protect new concrete for residential, industrial and commercial applications.
Concrete Applications:
- Roof Decks, Parapet walls and Gutters
- Retaining Walls
- Roof Gutters
- Concrete tanks
- Fountains and water features
- Residential and Commercial floorings
- Warehouse floors
- Concrete slabs and Balconies
How to Repair, Waterproof, Decorate Water Features and other Landscaping
Water Features
If you are concerned about the deterioration of water features built into landscaping, Polymer coatings provide several benefits such as:
*Forming a leak proof membrane
*protecting against corrosive chemicals
*Adding unique design elements
Concrete or plastic lined water basins such as ponds and fountains are particularly susceptible to deterioration with the use of chlorine and other cleaning agents. Change in weather causes it to expand and contracts resulting in cracks and leaks. Even rain water flowing through a tunnel will eventually erode concrete and stone.
When applied to containment tanks, the leak proof barrier prevents oil and hazardous chemicals from causing substantial damages and clean-up costs. Our industrial polyurethane and polyurea products safeguard people, the environment and your investments.
Industrial Applications include:
- Coating of Pipes
- Primary and secondary containment
- Oil and gas processing sites
- Heavy duty machines
- Warehouse floors
- Chemical containment
- Fuel and oil containment
Armorthane products prevent detoriation and extends the service life of utility vehicles and trucks. The product is used to repair damage, add performace years and makes them look nice again. Coating with Armortahne also increases the resale value.
- Resists denting and scratching
- Holds shape firmly yet flexible enough to avoid breaking or chipping
- Protects against corrosion and rust from elements or most chemicals
- Reduces slipping and skidding with textured surface
- Absorbs impact to reduce vibration and noise
- Bonds permanently and dries in seconds for fast and easy applications
- Safe for potable water applications
Automotive Applications include:
- Load beds of trucks and utility vehicles
- Floor of ambulances
Whether residential, commercial or industrial settings, there is no need for owners to settle for plain or clear coated concrete or aging plywood floors. All of these areas can benefit from attractive, long-lasting protection.
- Indoors and Outside Surfaces
- Concrete or Plywood Decks, Porches, Patios
- Basements, Mud Rooms, Dens
- Garage Floors, Driveways, Parking Lots
- Entryways, Showrooms, Retail Outlets
- Manufacturing, Warehouses, Loading Docks
- Schools, Daycare, Healthcare Clinics
- Animal Habitats, Veterinary Clinics
- Food Processing Areas
- Workshops, Office Complexes
ArmorFoam professional spray foam insulation strengthens walls and roofs to extend the life of a structure and defend against windstorms and water damage. It is specifically designed for new structures. However, this industrial spray foam insulation also works well for sealing existing foundations, pipes, attic ceilings and walls, and the underside of flooring accessed from unfinished basements and crawl spaces.
ArmorBlast and UltraBlast, two of our blast mitigation coatings, may not be blast proof but they can significantly reduce casualties and property damage from hostile explosive attacks compared to non-coated surfaces. These sprayed-on polyurea coatings were specifically developed to survive massive pressure, such as explosion, when applied to concrete or metal structures. The ballistic protection coatings are suitable for armored vehicles and high profile buildings and offers proven blast mitigation benefits.
ArmorBlast and UltraBlast are developed from a two-component 100% solid polyurea. They can be sprayed at a wide range of temperatures from 18°F to 150°F. Temperature exposure ranges from -40°F to 350°F with high tear-tensile strength and chemical and water resistance. In addition to CMU structures, they can be sprayed on other substrates such as metal, concrete and foam blast mats. These seamless, waterproof coatings have no VOC’s or solvents
The Armorthane Advantage
Armorthane offers a full line of top –quality polyurethane and polyurea products and high tech spraying equipment and supplies. Armorthane ‘s polyurethane and polurea are durable, flexible and safe protectants. Whether you are looking for waste containment, a truck bed liner, concrete sealer, waterproofing membrane or home insulation, Armorthane products will meet your needs.
Armorthane offers several polyurethane coating products. Some have relatively broad use while others were developed to solve specific problems.
Armorthane Polyurethane and Polyurea products are permanently Spray On coatings that protect your surfaces. With numerous applications our polyurethane and polyurea coatings are suitable for industrial, residential, marine, automotive, military use and more. Available in high pressure and low pressure applications.
Armorthane protective coatings are durable, chemical resistant and attractive for spraying various thicknesses depending on the application and provide a superior surface for many applications. Bonds on concrete, metal, fibreglass, wood, geotextile materials and much more
Armorthane not only waterproofs and protects, it also aids in sound proofing, as well as temperature insulator and has been specifically formulated as a durable protective coating, ensuring that for years to come your investment will have the best protection.
Armorthane products withstands Adverse Conditions
- More durable than rubber and plastics
- Flexible in weather conditions from -62oC to 138oC
- No softening in extra heat, not brittle in cold
- Stretches up to three times before breaking
- Watreproof, resists corrosion
- Tack free within 60seconds and completely cured in 24 hours(Quick dry)
- Protects high wear areas
- Dent & Scratches resistant
- Reduce noise & Vibration
- Available in various colours
Proven Safe
- Solvent free; no VOCs and CFCs
- Armorthane Sprayed On coatings are 100% solid polyurethane, so there is no environmental hazard
- Complaint with health regulations for food processing
What Does Extra Protection mean to You?
Armorthane Sprayed-On products protects a variety of surfaces when other coatings don’t hold up!
- Decks, Patios, Roof gutters, Parapet walls
- Factory and Warehouse floors
- Foundations and Basements
- Floor of Ambualnces/Utility vehicles
- Water tanks
- Portakabins
- Floor and walls of cold storage rooms
- Swimming pool
- Fountains and Water Features
- Shower areas
- Diesel/Chemical storage tanks
- Wood decks
- Retaining walls
- Load beds of trucks
“if you can imagine it we can coat it”